SWT-WP1 Waterproof Welder
1.The front wheel is movable from left to right, especially suitable for welding in various narrow Spaces
2.Self-balance design of the pressure wheel ensures the welding quality of uneven surface
3.One-click walk button makes it more convenient to move the machine in standby mode
4.Specially designed for outdoor power supply, the power supply voltage range of 180-240V can still be used normally
5.Welding temperature and speed closed-loop control ensure reliable welding quality
| Application | PVC/TPO/CPE/EPDM welding |
| Model | SWT-WP1 |
| Voltage | 230V |
| Power | 4200W |
| Welding speed | 1.0-10.0m/min |
| Heating temperature | 50-620℃ adjustable |
| Welding pressure | 200N addible |
| Welding seam | 40mm |
| Net weight | 38kg |
| certificate | CE |
Product Adavantage:
Notice:
1. Unplug the tools before opening it to avoid of being hurt by exposed wires or component inside the machine with
power
2. Incorrect use of it can cause fire and explosion hazard because of high temperature, especially near combustible
materials and explosive gases.
3. Don’t touch heater tube and nozzle when they are hot. They may cause burns. Don’t point hot air flow in the direction of people or animals.
4. The voltage rating stated on the welder must correspond to line/mains voltage (220V). The drop cable / wire with protective earthed conductors can only be used.
5. To ensure operator safety and reliable operation of equipment, the power supply must be installed power supply and leakage protection at the construction site.
6. It must be running at the correct use of manipulation of the operator, or they may cause a fire or explosion caused
by high temperature.
Application:
1.Roofing Membrane Installation
Used for welding TPO & PVC roofing membranes in commercial, industrial, and residential buildings.
Ensures strong, waterproof seams for flat or low-slope roofs.
2.Waterproofing Projects
Suitable for waterproofing tunnels, basements, reservoirs, and other structures requiring airtight seams.
3.Industrial & Civil Construction
Used in large-scale construction projects where durable, heat-welded roofing is required.
After-sales Service:
We always provide high quality products and workable price for every clients and have won the trust,
enjoy a good reputation in the market.
Machine Quality Guarantee: 24 months.--If any parts broken or does not work under normal operating,
we provide them for free!
FAQ
Q: What materials can the SWT-WP1 weld?
A: It is designed for TPO (Thermoplastic Polyolefin) and PVC (Polyvinyl Chloride) roofing membranes.
Q: Is the SWT-WP1 suitable for all roof types?
A: Yes, it works best on flat or low-slope roofs commonly found in commercial and industrial buildings.
Q: What is the welding width?
A: Typically, it welds a 40–50mm (1.5–2 inches) seam, depending on the overlap and settings.
